Beds and mattresses must be correctly labelled. (a) Each mattress set subject to the Standard shall bear a permanent, conspicuous, and legible label(s) containing the following information (and no other information) in English: (1) Name of the manufacturer, or for imported mattress sets, the name of the foreign manufacturer and importer; (i) For mattress sets produced in the United States, the complete physical address of the manufacturer. The label text shall comply with the following format requirements: (1) All information specified in paragraphs (a)(1) through (6) of this section must be in 6-point font or larger with mixed uppercase and lowercase letters. All mattresses sold in the United States must meet be the requirements of 16 CFR Parts 1632 and 1633, as regulated by the U.S. Consumer Product Safety Commission (CPSC). In addition to the requirements imposed by the CPSIA, certain children’s products list and are also subject to CPSC-administered safety standards. Select face material 3 layers laminate selfadhesive. Electronic Code of Federal Regulations (e-CFR), CHAPTER II - CONSUMER PRODUCT SAFETY COMMISSION, SUBCHAPTER D - FLAMMABLE FABRICS ACT REGULATIONS, PART 1633 - STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS. CPSC notice announcing proceeding to consider whether to revoke or amend Part 1632. The foundation identifier should be in 12-point font or larger, bolded, and underlined. LAW LABELS Every article of upholstered furniture and bedding products must have a law label to identify the manufacturer, their location, and the filling materials that were used during the making of … (d) The statements specified in paragraphs (a)(6)(i) through (iii) and (a)(7)(i) through (iii) of this section may be translated into any other language and printed on the reverse (blank) side of the label. CPSC-2010-0085, August 18, 2010 - Comments due by September 17, 2010 . Manufacturers of children’s products must also conduct periodic sample testing for all applicable safety standards. A federal law requires that any mattress containing used stuffing bear a label with that information, but it's up to each state to design that state's standardized tag and regulate mattress labeling. Standard for the Flammability of Mattresses and Mattress … The National Bed Federation (NBF) is the recognised trade association that represents UK manufacturers and suppliers of beds. mattresses, sleeping bags) OR – Reclined or Sat upon (i.e. See Figures 12 through 15 of this part. (iii) For mattresses intended to be sold both alone and with a foundation, the label shall state “THIS MATTRESS IS INTENDED TO BE USED WITHOUT A FOUNDATION OR WITH FOUNDATION(S): .” See Figures 14 and 15 of this part. §389-b. Most products containing hidden fill material require a law label if it is: – Slept on/in (i.e. Manufacturers of children’s products must place a permanent distinguishing mark or label on the product and its packaging that identifies the source of the product, the date of manufacture and more detailed information on the manufacturing process, such as a batch or run number. Explore recently updated federal mattress regulations below. For example, in many places, old mattresses that have been recovered with … The text shall be centered in a text box with the width measuring 2 For crib and children’s mattresses and mattress pads: • For products designed and intended primarily for children 12 years or younger, a permanent, distinguishing mark (tracking label) must: – Be affixed to the product and its packaging, and – Provide certain identifying information. (2) The words “Foundation ID:” followed by a distinct name and/or number that corresponds to the name and/or number used on the mattress. Domestic with or without Foundation Label Domestic mattress with or without a foundation that meets the 16 CFR Part 1633 Federal Flammability requirements. Depending on the state, used mattresses may contain a tag, sometimes red or yellow in color, that warns that the mattress contains used materials. (3) The statement specified in paragraph (a)(7)(ii) of this section must be in 10-point Arial/Helvetica font or larger in uppercase letters. The label must be white with black text. Cotton taffeta selfadhesive. (i) For mattresses intended to be sold without a foundation, a certification stating “This mattress meets the requirements of 16 CFR part 1633 (federal flammability (open flame) standard for mattresses) when used without a foundation”; or, (ii) For mattresses intended to be sold with a foundation, a certification stating “This mattress meets the requirements of 16 CFR part 1633 (federal flammability (open flame) standard for mattresses) when used with foundation .” Such foundation(s) shall be clearly identified by a simple and distinct name and/or number on the mattress label; or, (iii) For mattresses intended to be sold both alone and with a foundation, a certification stating “This mattress meets the requirements of 16 CFR part 1633 (federal flammability (open flame) standard for mattresses) when used without a foundation or with foundation(s) .”.Such foundation(s) shall be clearly identified by a simple and distinct name and/or number on the mattress label; and. See Figures 14 and 15 of this part. The letters in the word “WARNING” shall be no less than 0.5 inch (1.27 cm) in height and all letters on the label shall be in a color which contrasts … (i) For mattresses intended to be sold without a foundation, the label shall state “THIS MATTRESS IS INTENDED TO BE USED WITHOUT A FOUNDATION.” See Figures 16 and 17 of this part; or, (ii) For mattresses intended to be sold with a foundation, the label shall state “THIS MATTRESS IS INTENDED TO BE USED WITH FOUNDATION(S): .” See Figures 12 and 13 of this part; or. 1/2″ and the length increasing as needed. Enforced by U.S. Federal Trade Commission, the Textile Fiber Products Identification Act and subsequent rules require that: “Any upholstered product, mattress or cushion which contains stuffing which has been previously used as stuffing in any other upholstered product, mattress or cushion shall have securely attached thereto a substantial tag or label, at least 2 inches by 3 inches in size, and statements thereon conspicuously stamped or printed in the English language and in plain type not less than 1/8 inch high, indicating that the stuffing therein is composed in whole or in part of reused stuffing, secondhand stuffing, previously used stuffing or used stuffing.”, Manual of Labeling Laws & Regulation Requirements, Voluntary Dimensional Guidelines for Bedding Products & Components, CPSC Part 1633 Frequently Asked Questions, CPSC Statement on FDA Exemption from Part 1633, ISPA Supplies Guide Including a Directory of Testing Labs, CPSC-accredited third party or in house testing lab, Manufacturers must also conduct sample testing of their products on a periodic basis, CPSC-accredited third party or in-house lab, products must place a permanent distinguishing mark or label, Textile Fiber Products Identification Act, International Sleep Products Association | ISPA. 3 layers laminate with polyesterfilm inside, both side paper out. The exact law label … 1/2″ and the length increasing as needed. This requirement applies to all testing, including 16 CFR Part 1632 and 1633 flammability testing, for mattresses designed or intended primarily for children twelve and younger.

White Faux Leather Tote Bag, Srm University Delhi Fee Structure, Foundation Brush Morphe, Skil Belt Sander, Messiah Sing-along Score, 1978 Honda Cb750 Oil Type, Causes Of Social Mobility,